[Spectrum R3] 3. How to Pitch a Tent - Hoyoung

Hoyoung.m4a

1.99MB

How to Pitch a Tent

These general instructions should allow anyone to pitch any size or style of tent. Keep in mind that pitching a tent alone, even if you have experience, is difficult.

 

1. Choose a flat area on which to pitch your tent. Remove any stones or rocks that might poke through the tent’s floor.

2. Take the tent and all equipment out of the storage bag. Lay everything on the ground neatly.

3. Spread a groundcloth over the chosen spot. Then, lay the tent floor over the groundcloth. Fold the edges of the groundcloth under,so they do not stick out from the edges of the tent.

4. Make sure the tent door is zipped shut. Then, pound a stake through each loop, pulling snugly as you go so the floor gets stretched to its full size.

 

5. Put together the tent poles, if necessary. Thread each one through its loops or channels. Do not step or walk on the tent to do this. If necessary, crawl or lie down on your stomach to reach the center of the tent.

6. Raise the poles. If you have a partner, work on opposite sides of the tent.

7. Pull the guy lines straight out from the sides of the tent. Peg each one.